• English
  • Chinese
  • Japanese
  • Spanish

The Gen IV Compression system is a tabletop-type system with adjustable leveling feet. Test parameters are easily configured—including pre-load weight, final load weight, delay settings, deflection, and speed (in/min). The Gen IV is easily calibrated and can complete a test routine in only four seconds.

Features

  • The fixture is a tabletop-type system with adjustable leveling feet
  • Test Parameters are easily configured, including Pre-load Weight, Final Load Weight, delay settings, Deflection, and Speed (in/mi)
  • The position data can be directly trans-ferred to an industry-standard CSV file
  • Now able to complete a test routine in 4 seconds!!
  • Easily calibrated
  • Advanced Linear Encoder Technology
  • Computer controlled using the ADC MechLab software
  • Resolution: +/- 0.001”
  • Adjustable Positioning Reduces Cycle Time
  • 4 Second Test Cycle
  • Multiple test functionality
  • Compress to Load, or move to a deflection and read the load

Tooling Explanation

  • ADC standard tooling consists of a flat top platen and a bottom platen with a centering dimple. The stand bottom platen is shown below. The equipment can accommodate your own propriety tooling design, or ADC can supply the unit with specified tooling

GEN IV Specifications

Machine Power110 TO 240 VAC, 6A, 50-60 Hz, Single Phase
Machine Weight90 LBS
Overall Dimensions12W X 20T X 20D
Throat DiameterGOLF BALL AND CORES
Capacity1000 POUND LOAD COMPRESSION
StrokeD2" STROKE
MountingBENCH TOP MOUNTING
Supplied Load Cell300 POUNDS +/- 0.1% (500 LB AND 1000LB ARE AVAILABLE)

GEN IV Ordering

GEN IVADC-GENIV-A01
  • Included One Set of Tooling Platens
  • Unit Ships W/ MLP-300LB Load Cell, Standard
Optional Load CellADC-MLP-500500LB Load Cell (In Addition to MLP-300)
TOOLING
Option 1ADC-2335004Golf Ball Bottom Platen, W/ Dimple
Option 2ADC-2335005Golf Ball Top Platen, No Dimple

Contact ADC