Gen IV
The Gen IV Compression system is a tabletop-type system with adjustable leveling feet. Test parameters are easily configured—including pre-load weight, final load weight, delay settings, deflection, and speed (in/min). The Gen IV is easily calibrated and can complete a test routine in only four seconds.
Tooling Explanation
ADC standard tooling consists of a flat top platen and a bottom platen with a centering dimple. The stand bottom platen is shown below. The equipment can accommodate your own propriety tooling design, or ADC can supply the unit with specified tooling
Features
- The fixture is a tabletop-type system with adjustable leveling feet
- Test Parameters are easily configured, including Pre-load Weight, Final Load Weight, delay settings, Deflection, and Speed (in/mi)
- The position data can be directly trans-ferred to an industry-standard CSV file
- Now able to complete a test routine in 4 seconds!!
- Easily calibrated
- Advanced Linear Encoder Technology
- Computer controlled using the ADC MechLab software
- Resolution: +/- 0.001”
- Adjustable Positioning Reduces Cycle Time
- 4 Second Test Cycle
- Multiple test functionality
- Compress to Load, or move to a deflection and read the load
Specifications
| Machine Power | 110 TO 240 VAC, 6A, 50-60 Hz, Single Phase |
| Machine Weight | 90 LBS |
| Overall Dimensions | 12W X 20T X 20D |
| Throat Diameter | GOLF BALL AND CORES |
| Capacity | 1000 POUND LOAD COMPRESSION |
| Stroke | D2″ STROKE |
| Mounting | BENCH TOP MOUNTING |
| Supplied Load Cell | 300 POUNDS +/- 0.1% (500 LB AND 1000LB ARE AVAILABLE) |